Utilisez cette barre pour afficher des informations sur votre politique en matière de cookies.
Passez votre souris pour zoomerCliquez sur l'image pour zoomer
/
Description
【Eau chaude à volonté】 Une eau chaude constante et constante . Détection continue de la température et du débit de l'eau pour un chauffage efficace et une performance stable à 1 °C près. Nécessite deux disjoncteurs bipolaires de 30 A.
【Dure longtemps et sans fuite】 Boîtier en alliage métallique et ports d'eau, élément chauffant séparé du tube d'eau réduisant considérablement le tartre, la corrosion et l'accumulation de minéraux sur l'élément, obtenant de meilleures performances et un faible entretien.
Économies d'espace et d'argent : La technologie auto-modulante régule la quantité d'énergie nécessaire pour chauffer l'eau uniquement lorsque vous en avez besoin, avec une efficacité de 99 %, permettant d'économiser jusqu'à 60 % sur les coûts de chauffage de l'eau par rapport à un chauffe-eau à réservoir traditionnel. Compact et mural, il s'adapte à tous les espaces, permettant un gain de place et une intégration parfaite dans les espaces restreints.
【Installation facile et protection de sécurité】 Certifié ETL avec protection contre la surchauffe, arrêt automatique du chauffage en cas de détection d'absence d'eau, fabrication de qualité pour la protection contre les fuites
【Installation】 11 kilowatts à 240 V consomment jusqu'à 46 ampères, ports mâles NPT 1/2 po, fil 12 AWG vers 2 disjoncteurs bipolaires 30 A, idéal pour fournir de l'eau chaude pour une salle de bain, un petit évier, une salle de pause de bureau et d'autres applications au point d'utilisation ou à faible débit
Pouvoir
• Commande à cadran marche/arrêt avec affichage numérique réglable de la température
• Contrôle de puissance automodulant
• Débit du modèle 11 kW : jusqu'à 2,68 GPM
Applications
•Pommeau de douche économiseur d'eau – 1,5 GPM
• Pommeau de douche standard – 2,0 GPM
• Évier à main standard – 0,5 GPM
• Évier de cuisine – 1 à 2 GPM
• Baignoire – 4 GPM
• Lave-vaisselle – 1 à 2 GPM
• Machine à laver – 1 à 1,5 GPM
• Gallons moyens par minute (GPM) basés sur les normes de plomberie de 2010
Liste de colisage
1 x ET110
1 x Kits de montage
Dimensions : 14,75" x 11,75" x 3,12"
Poids : 12 livres
Courant nominal : 46 A
Pression nominale : 150PSI
Connexions d'eau : 1/2" NPT
Fil requis : 2 x 12 AWG
Disjoncteurs requis : 2 x double pôle 30 A
Remarque : les disjoncteurs et le fil ne sont pas inclus
Livraison gratuite uniquement aux États-Unis continentaux. Malheureusement, nous ne proposons pas la livraison gratuite vers l'Alaska, Hawaï, les Îles Vierges, Porto Rico, Guam et le Canada. Cependant, si vous devez expédier vers ces destinations, veuillez nous appeler ; les frais de transport seront à votre charge, selon l'adresse que vous nous fournirez.
Lorsque vous passez une commande, nous estimons les dates d'expédition et de livraison en fonction de la disponibilité de vos articles et des options de livraison choisies. Selon le transporteur choisi, des estimations de dates d'expédition peuvent apparaître sur la page des devis de livraison.
Veuillez également noter que les frais de livraison pour de nombreux articles que nous vendons sont basés sur le poids. Le poids de chaque article est indiqué sur sa page de détail. Afin de respecter les politiques des transporteurs que nous utilisons, tous les poids seront arrondis à la livre supérieure.
Pour les retours dus à des regrets de l'acheteur (par exemple : commande par erreur, article non adapté, changement d'avis, article non utilisé, etc.) , nous déduirons 20 % du montant total de votre remboursement pour la perte subie en tant que vendeur . Seuls 80 % de votre remboursement seront alors reversés sur votre compte. En cas de retour défectueux, un remboursement intégral sera effectué sur votre compte.
Paiement et sécurité
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
One of the best features of the Thermomate tankless water heater is how quiet it is. You barely notice it's there, but it provides hot water instantly. Great product for any home!
Switching to the Thermomate tankless water heater has significantly reduced our energy consumption. It's efficient, reliable, and provides instant hot water whenever we need it. Couldn't be happier!
Purchased as a gift for my Daughter and her first home purchase. She absolutely loves the cook top and uses is multiple times daily. A couple months in and she's had 0 problems with it. Doesn't require specific cookware and heats up FAST. Super easy to keep clean and when not in use, it's non intrusive to the countertop. She even preps food on the cook top, taking full advantage of the large flat area what she says is easier to clean up than her countertop. She got it installed right before Thanksgiving and put it to work immediately making an awesome Thanksgiving feast as its first real use. It replaced a tired old cook top with only two working burners, so it was the perfect housewarming gift. The center Griddle friendly burner has quickly become her favorite feature, using it for breakfast prep, a warming plate area and as a roaster pan friendly burner. It's held up very well with no apparent wear to the enamel bonded to the glass. Zip~
Just installed today. It replaced a thermoflo 18kw that caught fire a few days after a little over a year of use That one was an 18kw and this one is an 11kw and far out performs the 18. There's no fluctuations in temp and heats up faster. We have a small farm house on well water but this little guy doesn't care about pressure loss nor the cold water. It just does it's job. All that's required of it is one shower and a bathroom sink so I hope it last for many years. If any faults it's the manufactures recommendation on using 12awg wire with the 2 30 amp breakers. We have no codes where we live but it's not recommended to use 12awg wire and 10awg wire is. Many inspectors would fail the installation if 12awg was used. Personally I went with the 10awg, especially after having my other tankless heater catching fire. It was a fault in the heating element but it's always better to over do than under do when it comes to electricity. I highly recommend this little unit.
I like how this unit uses two 110 circuits allowing the use of less expensive wiring. Also the ability to set the water temp to a degree is really much better than the 3 gal. tanked heater we had under the sink previously. And we are using less elec. now to have quick hot water at our kitchen sink. This unit has a good flow rate and feeds our dishwasher and sink faucet no problem.Also was easy to install.
It was very very quick in getting but the box it came in didn't have my apt number and the print on the label was so small l
Could hardly read it but thanks again for being so quick
Learned a lot, installed it myself, it’s exactly what we need for this situation at hand. I didn’t know that it used to double pole breakers… I had to compensate for that in my breaker bonus. But I am well pleased good job and thank you… Farewell.🙌🙌
I wanted something to supply hot water for a sink in my garage. After researching several brands, I decided to go with Thermomate, specifically the ET110. The provided instructions were clear, and installation was also easy. So far, it works great, and I would highly recommend it.
Couldn't believe how easy this was to install. Now I can enjoy long,long hot showers without the fear of the water getting cold.
Perfect for soaker tubs. Just love it.
After many searches and reading reviews from other sites this was a great purchase. We use it at our camp which replaced a 50 gal electric hot water heater. Unit heats up fast and also love the 1 degree option. No issue with using shower and kitchen sink. Camp has 2 sinks and 1 shower. Simple hook up with some knowledge of electricity and plumbing.For those that give bad reviews, I found they do not read the descriptions. Many state that it did not come with breakers, or did not heat well do to using smaller wire size.IT IS IN the description and pictures. We bought the 18kw and also looked at the 27kw. Both state what they need for amps, how many breakers, wire size, Which you could look up for what AWG for specific amps. and states it does NOT come with breakers or wire. It works on 240 volts so you need 2pole breakers and 2 home runs of #8/3 AWG wire. If its a long run over 100 ft. from electrical panel, use #6AWG you can over size the wire but never undersize the wire.27kw 3- 40 amp 2 pole breakers with #8 AWG wire18kw 2-40 amp 2 pole breakers with #8 AWG wireif your not knowledgeable use and electrician
We installed this in our hunting lodge to feed hot water to a bathroom. It sends hot water to a shower and sink and never misses a beat!! Our water temp. in the mountains is 50 degrees F. and has no problem heating the water. we have it set to 120 degrees and the water temp. is 120 on full hot. Make sure you use two 30A breakers and 10g. wire. This is an excellent product, just make sure you install it correctly.
Got my 1st electric bill and it literally cut it down more than half I should have done this year ago I was suggested if this one goes bad for some reason I'm getting another one ,it was a great solution to getting solar panels I can't believe it
I remodeled an old house with a huge ugly hot water heater. It was in the bath/laundry room combo. It took up so much room. I made the decision to put in an electric tankless heater. Was a little leary at first. It has far exceeded my expectations in size, looks and operation. Glad I chose it!
Water temp is steady after running a minute, set to only 115. Good to be familiar with technical requirements; for example need installation of two separate 240V circuits. The rest is a standard install. Also, I didn't install the valve kit for flushing because the isolation of cold water flow from the heating elements in this unit, reduces inline build up needing to to be cleaned often, if at all.