Plumbing is not done yet . It looks good so far.
Beschreibung
Kein Warten mehr auf heißes Wasser: Der 1,3-Gallonen-Mini-Warmwasserbereiter am Einsatzort liefert sofort heißes Wasser dort, wo Sie es benötigen, mit schneller Wiederherstellung und reduziert so den Standby-Verlust. Thermischer Wirkungsgrad bis zu 99 %
【Einfache Installation】 Abmessungen: 11,42" x 11,42" x 9,65" kompaktes Design, kann an der Wand oder am Boden unter Waschbecken/Arbeitsplatte montiert werden, an eine Standard-120-V-Steckdose angeschlossen, keine spezielle Verkabelung erforderlich. Nennstrom 12 Ampere
【Einstellbare Temperatur】 Thermostat mit 3 Temperaturstufeneinstellungen im Bereich von 77 °F bis 140 °F mit Übertemperaturschutz und einem Gefriermodus, um ein Einfrieren des Tanks zu verhindern
【Premium-Qualität und langlebig】 Glasbeschichteter Tank für hervorragende Isolierung, Temperatur- und Druckentlastungsventil im Lieferumfang enthalten, UL-gelistet, was eine lange Lebensdauer gewährleistet
【Spezifikationen und Garantie】 Abmessungen: 11,42" H x 11,42" B x 9,65" T; Gewicht: 11 lbs; Wasseranschlüsse: 1/2" NPT, elektrische Anforderungen: 1,44 kW bei 120 Volt, Steckverbindung mit 2 Fuß Leistung Kabel; Maximaler Wasserdruck: 150 PSI; Nennstrom: 12A. 3 Jahre eingeschränkte Garantie für den Tank, 1 Jahr Garantie für Teile und 24-Stunden-Kundendienst
Packliste
-
Benutzerhandbuch
-
T&P-Überdruckventil
-
Montagesätze
KOSTENLOSER Versand nur an Adressen auf dem US-Festland. Leider bieten wir keinen kostenlosen Versand nach Alaska, Hawaii, auf die Virgin Islands, nach Puerto Rico, Guam oder Kanada an. Sollten Sie dennoch an diese Orte versenden müssen, rufen Sie uns bitte an. Die Frachtkosten werden dann von Ihnen entsprechend der von Ihnen angegebenen Adresse übernommen.
Wenn Sie eine Bestellung aufgeben, schätzen wir die Versand- und Liefertermine basierend auf der Verfügbarkeit Ihrer Artikel und den von Ihnen gewählten Versandoptionen. Je nach gewähltem Versanddienstleister können die geschätzten Versandtermine auf der Seite mit den Versandangeboten angezeigt werden.
Bitte beachten Sie, dass die Versandkosten für viele unserer Artikel gewichtsabhängig sind. Das Gewicht eines Artikels finden Sie auf der jeweiligen Artikeldetailseite. Um den Richtlinien der von uns beauftragten Versandunternehmen gerecht zu werden, werden alle Gewichte auf das nächste volle Pfund aufgerundet.
Bei Rücksendungen aufgrund von Reue des Käufers (z. B.: Bestellung versehentlich, Artikel passt nicht, ich habe es mir anders überlegt, werde nicht mehr benötigt usw.) ziehen wir 20 % des Gesamtbetrags der Rückerstattung für den uns als Verkäufer entstandenen Verlust ab . Das bedeutet, dass nur 80 % der Rückerstattung auf Ihr Konto zurücküberwiesen werden. Bei Rücksendungen mit Mängeln wird der volle Betrag auf Ihr Konto zurücküberwiesen.
Zahlung & Sicherheit
Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
Customer Reviews
Overall rating: 4.9 / 5 from 120 reviews.
Yesterday, took almost two minutes to get hot water at this sink. Now - immediate. Game changer. Installation actually took 2-3 hrs, but mostly our mistakes/learning curve. We’ll be installing 2 or 3 more now, and expect it’ll take less than an hour for the next ones. Yes, totally confident in this unit, and from what I know about this company and their products, I’m a fan.
I have this in my workshop for hot water for washing my hands. It works great so far.
Great convenience at point of use.
This mini tank electric water heater from Thermomate has exceeded my expectations. It's energy-efficient, saving me money on my electricity bill, and it's incredibly reliable. I haven't had any issues since installation. Great product!
I installed the Thermomate mini tank electric water heater in my small apartment, and it has been a game-changer! It heats water quickly and efficiently, providing just the right amount for my needs. Installation was a breeze, and the compact size is perfect for limited spaces.
I purchased this compact hot water tank for installation in the kitchen of a camper I'm building in a RAM ProMaster van. It was very easy to install and it heats up quicker than I anticipated it would. The water temperature appears to be just what I need for kitchen use. Because it is currently winter, I haven't yet had an opportunity to use it on a trip , but the ease of installation meant that it was simple to disconnect and bring into the house for the winter to prevent it from freezing.
I wanted a small, easy to install, water heater to fit under my kitchen sink to eliminate waiting several minutes for the hot water to reach the kitchen from the main 50 gallon tank located on the opposite side of the house. I considered going with the circulating pump, but that looked like a much bigger project. I did not need a large capacity tank, just enough "instant" hot water to fill the dish pan. The 1.5 gallon size looked ideal, plus the size dimensions fit the space available. After looking at several models and reading all the reviews I selected the Thermomate Mini Tank Electric water heater 1.5 gallons, based on price, quality, and the ability to service the internal components if needed.When I unpacked the unit I was immediately impressed with quality, feel, and appearance of the unit. I had read reviews of some of the other brands of mini tanks having problems with leaking connections. I had no problems at all, and the installation took less than an hour. The tank has 1/2" NPT nipples for both hot and cold. My existing faucet had a 3/8" OD fitting connected to the hot water supply line. I went to Home Depot and bought a new 16" long standard steel faucet hose with 1/2" FIP connection on one end and 3/8" OD connection on the other end. I connected the 1/2"FIP end to the "Cold Water" inlet nipple of the Mini Tank. No teflon tape or anything needed on the 1/2"NPT nipple. The 3/8" OD end of the hose connected to the hot water supply valve. For the "Hot Water" outlet side of the tank I bought a 12" long standard steel faucet hose with 1/2" FIP on one end and 3/8" OD on the other end. I connected the 1/2" FIP end to the 1/2" NPT nipple on the "Hot Water" side of the tank (no teflon tape), and bought a 3/8" OD male x 3/8" OD male connector to connect hot water outlet hose to the existing 3/8"OD hose from the hot water side of my faucet. With the water heater tank still unplugged, I turned the hot water supply valve on and opened the faucet to allow the Mini Tank to fill up and clear any crud from inside the tank (it looked crystal clear from the start). After a minute or two I shut the faucet off and checked all the connections ..... no leaks!!I plugged the unit into a Sengled WiFi Smart outlet so I can keep the power off when not needed. I set the temperature dial to 125 degrees and the Red power light came on. The light went out after about 10 minutes and I was pleased to find I had hot water as soon as I turned on my faucet!!I still need to connect the Pressure Relief Valve discharge port to the drain line. I plan to connect it to the drain line from the dishwasher.So far I couldn't be more pleased with the unit, the ease of installation, and simple operation. Hopefully it will give me several years of trouble free service.
I put this water heater under the sink in my outdoor kitchen. I was hoping to leave it at a very low setting to get warm water, but it appears to need to be on setting 2 (not 1) for me to be able to detect the difference between cold and hot water in my sink. Mind you - it has been hot here in Southern California, and I do notice more of a difference in the cool evenings. I contacted the seller, and they seemed open to an exchange, so I've decided to keep it. It's good enough for my bbq.
Works great but only after a call to Customer Support. Nowhere in the manual does it say to turn the rheostat to Max to get it to work.
made a little room for in-laws works great
We use this water heater in our concessions trailer and it is perfect for our needs! It heats quicky and produces enough water for a washing sink. It is compact and was easy to install!
The 1.3 gal. water heater works great. One of the best things about the under sink water heater is it eliminates the need to run a second water line from the larger water heater. Also, it is warm when the faucet is opened instead of waiting for the cold to flow through before the hot arrives which of course saves power and water.
This unit is a replacement and we love it. It's much smaller but still gives us hot wat on demand. Super easy to install. We use it in our master bath. We have more under sink room with this one.
Working fine
EASY CONNECTION AND WORKS GREAT
Good little hot water heater for the bathroom.
It's only been installed for a week, so far ok, we'll see.
Works great. Easy install.
Works as promised
Not hard to install and works great. If you are undecided between two sizes, get the biggest one that will fit.
Easy hook-up, consistent hot water.
Very fast delivery.
Thank you 😊👍
I didn't install it because it's way too large to go under my sink vanity and I have no other place to hide it in my tiny bathroom. Other than that, I'm sure it would work well.
This water heater works great to heat water for a hand washing sink in our Cafe.
These heaters work as described, and I recommend them. I have purchased three heaters now. They work very well for me.
Put it in my garage tested yesterday 7 minutes and I had hot water works awesome
The 1.3 Gallon Electric Point of Use Water Heater is perfect for instant hot water at sinks. Compact, easy to install with a simple 120V plug-in, and heats quickly with reliable temperature control. Durable build, energy-efficient, and ideal for small spaces. Great value and highly recommended!
Deivery of the point of use (sink) hot water heater was as promised. A local plumber was familiar with the installation, and it is working fine with a small solar system in an off-grid studio.
Just installed it and so far it is doing what I had hoped it would. Faster hot water to my kitchen sink. Lets see if my water bill goes down now.
Works great!
So far so good
Works great. Would have been helpful to have in your instructions to install the pressure relief valve. Had some water spillage before I realized that it must be installed.
It was easy to install and worked well as soon as the water was turned back on. It met my needs perfectly by fitting under the sink and providing instant hot water.
It's a good hot water heater
Great product; I’ve used on before. This application was wrong for it but keep up the good work..
So far, it's working perfectly! I love being able to adjust the temperature with the knob. I have it set so that I just use hot water when washing my hands, so I don't even have to use any cold water. Love it!
Nice and easy install. works great so far.
Good quality product. Easy to get set up & running!