Electric patio heaters are an excellent addition to any outdoor space, providing warmth and comfort during colder months. Whether you're installing a heater for your backyard, patio, or even an indoor space like a garage, Thermomate offers a range of models designed to suit different heating needs. In this guide, we’ll walk you through the process of installing your electric patio heater, focusing on the four Thermomate models available:
- Electric Outdoor & Indoor Patio Heater
- Electric Carbon Infrared Patio Heater 1500W
- Electric Outdoor Patio Heater 1500W w/ Low Glare Schott Glass
- Thermomate Infrared Heater with Remote & 24H Timer 3000W
By following these steps, you’ll have your heater installed safely and ready to deliver comfortable warmth in no time.
Tools and Materials You’ll Need
Before you begin the installation process, gather the necessary tools and materials:
- Electric drill and appropriate bits
- Wall or ceiling mounting brackets (included with your heater)
- Screws and anchors (included with your heater)
- Measuring tape
- Level
- Pencil or marker for marking installation points
- Ladder (if installing at height)
- Appropriate electrical outlet (based on the heater model's voltage requirements)
Step 1: Choose the Right Location
Proper placement of your electric patio heater is key to ensuring optimal warmth and safety. Keep the following factors in mind:
- Height: Most heaters should be mounted between 6 to 9 feet above the ground to ensure efficient heating without being too close to people.
- Clearance: Make sure there is sufficient clearance from walls, ceilings, and other objects. Each Thermomate model comes with specific clearance guidelines—generally, maintain at least 2 feet of clearance on all sides.
- Mounting Options: Decide whether you want to mount the heater on the wall or ceiling. Thermomate heaters come with versatile mounting brackets, allowing for both options.
- Electrical Outlet: Ensure there is a nearby power source. Avoid using extension cords, as they can create safety hazards. Install the heater within reach of a grounded outdoor electrical outlet, ideally protected by a weatherproof cover.
Step 2: Assemble the Heater (If Needed)
Some models, like the Electric Outdoor & Indoor Patio Heater, may come with a bit of assembly required, such as attaching the mounting brackets or adjusting the angle of the heating element. Refer to the manual that comes with your specific model for detailed assembly instructions.
For instance, the Thermomate Infrared Heater with Remote & 24H Timer 3000W might include additional features such as a remote control setup, which can be easily connected before mounting.
Step 3: Mark Your Mounting Points
Once you’ve determined the optimal location, use a pencil and level to mark the points where you will drill holes for the mounting brackets.
- Wall Mounting: If you're installing the heater on a wall, ensure the mounting points are level and aligned. Most heaters come with adjustable mounting brackets, allowing you to tilt the heater to direct heat as needed.
- Ceiling Mounting: If you opt for ceiling installation, follow the same steps, making sure the heater is positioned directly above the area you want to heat.
Step 4: Install the Mounting Brackets
Using a drill, make the holes where you’ve marked, and insert the appropriate anchors to ensure a sturdy installation. Next, secure the mounting brackets to the wall or ceiling with screws. Make sure everything is securely fastened, as patio heaters can be heavy, and proper installation is essential for safety.
For models like the Electric Outdoor Patio Heater 1500W with Low Glare Schott Glass, the mounting brackets are designed to support the low-glare glass feature, ensuring heat is directed efficiently without emitting harsh light.
Step 5: Mount the Heater
With the brackets securely in place, attach the heater to the mounting brackets. Most Thermomate models feature a straightforward attachment system where the heater simply slides into or locks onto the mounted brackets. Tighten any screws or fasteners that secure the heater in place.
Step 6: Connect to Power
After the heater is mounted, connect it to the nearest power outlet. Ensure the heater is rated for the voltage of your power source (most of the models listed above run on 120V or 240V).
For the Thermomate Infrared Heater with Remote & 24H Timer 3000W, ensure you sync the remote control before operating the heater. This model also includes a 24-hour timer feature, allowing you to set a schedule for automatic shut-off.
Step 7: Test the Heater
Once installed, turn on the heater to ensure it's functioning correctly. Follow the manufacturer’s instructions for operating the heater safely, adjusting the heat settings as needed. For models with remote control or adjustable timers, test these features to confirm they're working properly.
Safety Tips
- Keep Flammable Materials Away: Maintain a safe distance between the heater and any flammable objects, such as curtains or furniture.
- Supervise Use: Avoid leaving the heater running unattended for extended periods.
- Weatherproofing: For outdoor installations, ensure the heater is adequately protected from rain and moisture. Most electric patio heaters are weather-resistant but should still be shielded from direct water exposure.
Conclusion
Installing an electric patio heater can significantly enhance your outdoor living experience, especially as temperatures drop. With Thermomate’s range of efficient and easy-to-install models, you can enjoy the benefits of targeted infrared heating in just a few simple steps.
By following this guide, you’ll have your electric patio heater set up and running in no time, bringing comfort and warmth to your outdoor spaces year-round. Be sure to refer to the user manual for model-specific details and always prioritize safety during installation and operation.
For any questions or further assistance, feel free to reach out to the Thermomate customer service team.
